Part 1 of 5 – Part 1 
The Electrocomp Corporation manufactures two electrical products: air conditioners and large fans. The assembly process for each is similar in that both require a certain amount of wiring and drilling. Each air conditioner takes 3 hours of wiring and 2 hours of drilling. Each fan must go through 2 hours of wiring and 1 hour of drilling. During the next production period, 240 hours of wiring time are available and up to 140 hours of drilling time may be used. Each air conditioner sold yields a profit of $25. Each fan assembled may be sold for a $15 profit.
Now, Electrocomp’s management also realizes that there should be a minimum number of air conditioners produced in order to fulfill a contract. Also, due to an oversupply of fans in the preceding period, a limit should be placed on the total number of fans produced.
If Electrocomp decides that at least 20 air conditioners should be produced but no more than 80 fans should be produced, the optimal production mix of air conditioners and fans is __________. (The first number is for air conditioners and the second for fans.)


In the optimal solution for the above question (Question 1), the slack for the four constrains — Total hours of wiring, Total hours of drilling, Number of air conditioners, Number of fans are __________, respectively. (Hint: A negative number shows that the constraint is binding downward, i.e. it sets a lower rather than an upper limit. You may take the negative sign out when interpreting the results.)


If Electrocomp decides that at least 30 air conditioners should be produced but no more than 50 fans should be produced, the optimal production of air conditioners is What’s This?


In the optimal solution for the above question (Question 3), the slack for the four constrains — Total hours of wiring, Total hours of drilling, Number of air conditioners, Number of fans are __________, respectively. (Hint: A negative number shows that the constraint is binding downward, i.e. it sets a lower rather than an upper limit. You may take the negative sign out when interpreting the results.)

Part 2 of 5 – Part 2 
The Outdoor Furniture Corporation manufactures two products, benches and picnic tables, for use in yards and parks. The firm has two main resources: its carpenters (labor force) and a supply of redwood for use in the furniture. During the next production cycle, 1,200 hours of labor are available under a union agreement. The firm also has a stock of 3,500 feet of goodquality redwood. Each bench that Outdoor Furniture produces requires 4 labor hours and 10 feet of redwood; each picnic table takes 6 labor hours and 35 feet of redwood. Completed benches will yield a profit of $9 each, and tables will result in a profit of $20 each.
The optimal production of benches is What’s This?

Part 3 of 5 – Part 3 
A winner of the Texas Lotto has decided to invest $50,000 per year in the stock market. Under consideration are stocks for a petrochemical firm and a public utility. Although a longrange goal is to get the highest possible return, some consideration is given to the risk involved with the stocks. A risk index on a scale of 1–10 (with 10 being the most risky) is assigned to each of the two stocks. The total risk of the portfolio is found by multiplying the risk of each stock by the dollars invested in that stock. The attached table provides a summary of the return and risk. The investor would like to maximize the return on the investment, but the average risk index of the investment should not be higher than 6.
The optimal dollar amount invested in Petrochemical stock is _________ dollars, and the optimal dollar amount invested in Utility stock is ___________ dollars. (Please only enter an integer and include no units. Hint: The total risk on each stock is the risk index times the investment in dollars. When you use Excel QM, you need to end the total risk in the right hand side of the constraint not simply the risk index.)


The average risk index (not in dollar amount) for the optimal investment is What’s This?

Part 4 of 5 – Part 4 
This part of the question is based on the following information.
The Heinlein and Krampf Brokerage firm has just been instructed by one of its clients to invest $250,000 of her money obtained recently through the sale of land holdings in Ohio. The client has a good deal of trust in the investment house, but she also has her own ideas about the distribution of the funds being invested. In particular, she requests that the firm select whatever stocks and bonds they believe are well rated, but within the following guidelines:
(a) Municipal bonds should constitute at least 20% of the investment.
(b) At least 40% of the funds should be placed in a combination of electronic firms, aerospace firms, and drug manufacturers.
(c) No more than 50% of the amount invested in municipal bonds should be placed in a highrisk, highyield nursing home stock.
Subject to these restraints, the client’s goal is to maximize projected return on investments. The analysts at Heinlein and Krampf, aware of these guidelines, prepare the attached list of highquality stocks and bonds and their corresponding rates of return.
Hint: You will need to rearrange one of the constraints in this problem so that all variables will be at the left hand side of the constraint and the right hand side of the constraint will be zero. You may adjust he sign of the constraint accordingly. For example, rearranging x < y + 2 to x – y < 2.
The optimal moneyinvested in the five stocks and bonds — Municipal bonds, Electronics, Aerospace, Drugs, and Nursing homes are __________ dollars, respectively.

The optimal number of medical patients per year is What’s This?


Among the 90 additional beds, _______ beds should be used for medical patients and _______ beds used for surgical patients.


At the optimal, there are What’s This?

^{"Place your order now for a similar assignment and have exceptional work written by our team of experts, guaranteeing you A results."}